Particle size contributes to many material properties such as stability, strength, or flowability. That is why measuring these sizes is of great importance in many industries.

Measurement of percentage of Moisture contended in the sample by gravimetric method, heating up to 100° C± 5°C for 120 minutes.

Measurement of the percentage of weight loss during ignition by gravimetric method, heating up to 950° ± 5°C for 60 minutes. Used to complement the chemical analysis by X-Ray Fluorescence

These methods help determine density using a volumetric method in powder samples, commonly used to measure volumes in transport trucks with hoppers, containers, etc. Loose or Apparent Density: When the powder is poured into a container or hopper without any compaction. Bulk Density: When the sample is poured into a container or hopper and compacted by percussion.

Determines the maximum angle at which the material can be piled without suffering a sliding or slumping.

Method used to determine density and porosity of a coarse material such as aggregates for construction.

Used to separate fractions of different minerals contained in a sample, using a liquid to separate them according their densities.

Determines the quantity of required oil absorbed by a wight fraction of a pigment, used to adjust the batch materials for pigments or fillers in polymers.

Grinding service using a Retsch disc mill, we offer it as a solution to other laboratories that require pulverized samples for their own analyses.